Mountfield SV150 Specifikace Strana 18

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 35
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 17
33 If the spring is not already released, keep hold
of the pulley (3) and slowly unwind the entire
cable (4) clockwise to release the return spring
gradually.
34 Dismount the hooks [ point “B”
].
35 Remove the pulley (3), making sure that the
return spring (9) stays in place underneath the
pulley.
WARNING! Carry out this operation with
utmost care to avoid injury when the spring
suddenly unwinds, as it could slip out of
place.
36 Clean the inside of the conveyor with degreas-
ing liquid by removing any leftover dirt or
grease.
37 Cut a section of cable (4) (Ø 4.5 mm and 2.40 m
long), fit one end in the pulley hole (3) and make
a knot to stop it from slipping out.
38 Fit the other end of the cable in the conveyor
hole and secure it to the handle (5) with a knot.
39 Spray some silicone lubricant onto the spring (9)
and apply liquid grease to inside the conveyor
housing. Check that the spiral spring (10) is
securely lodged in the conveyor housing and
put the pulley (3) back in place so that the inside
end of the spring (9) is firmly lodged in the slot
on the conveyor.
40 Refit the hooks [ point “B”
].
41 Turn the pulley (3) and the cable (4) anticlock-
wise for 5 complete turns in order to load the
spring, then release the pulley carefully to wind
the entire cable onto the pulley.
42 Check that the pulley (3) rotates freely.
43 After pulling the entire length of the cable, check
that the pulley (3) is able to complete another 2-
3 turns before compressing the spring.
44 Remount the internal screen (1).
45 Remount the conveyor [ 6.1.A
].
Tightening torques
6 Starter screw ........................................ 4-6 Nm
SV 150
6.2.0
STARTING SYSTEM
3 / 3
WORKSHOP MANUAL
page
from
2004 to ••••
01/2005
10
9
9
3
<= ...BACK... <=
Zobrazit stránku 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 34 35

Komentáře k této Příručce

Žádné komentáře

3com 3C16980 manuels

Manuels d'utilisation et guides de l'utilisateur pour Accessoires pour ordinateurs 3com 3C16980.
Nous fournissons des manuels en pdf 1 3com 3C16980 à télécharger gratuitement par type de document : Manuel de l'utilisateur






Plus de produits et de manuels pour Accessoires pour ordinateurs 3com

Modèles Type de document
10BASE-2 Manuel de l'utilisateur   3Com 10BASE-2 User Manual, 6 pages
3C16732 Manuel de l'utilisateur    3Com 3C16732 Manuel d&#039;utilisation [de] , 8 pages
100BASE-FX Manuel de l'utilisateur   3Com 100BASE-FX User Manual [de] , 28 pages
Switches Manuel de l'utilisateur   3Com Switches User Manual, 28 pages
16985ua.bk Manuel de l'utilisateur   3Com 16985ua.bk User Manual, 60 pages
2816-SFP Plus (3C16485) Manuel de l'utilisateur   3Com 2816-SFP Plus (3C16485) User Manual [de] , 66 pages
3C16751A Manuel de l'utilisateur   3Com 3C16751A User Manual [de] , 32 pages
XL PCI 10 Manuel de l'utilisateur   3Com XL PCI 10 User Manual [de] , 74 pages
WXR100 3CRWXR10095A Manuel de l'utilisateur   3Com WXR100 3CRWXR10095A User Manual, 800 pages
3C16895 Manuel de l'utilisateur   3Com 3C16895 User Manual, 74 pages
3900 Manuel de l'utilisateur   3Com 3900 User Manual [de] , 36 pages
3C16951 Manuel de l'utilisateur   3Com 3C16951 User Manual, 60 pages
3C16700A Manuel de l'utilisateur   3Com 3C16700A User Manual [de] , 40 pages
1000BASE-SX Manuel de l'utilisateur   3Com 1000BASE-SX User Manual [de] , 24 pages